kairda-ndt
KT330 Ultrasonic Thickness Gauge
This ultrasonic Thickness gauge is measuring thickness of various plates and machined parts, suitable for metals (such as steel, cast iron, aluminum, copper, etc.), plastics, ceramics, glass, glass fiber and any other good ultrasonic conductor.
The ultrasonic Thickness gauge monitors the thickness of all kinds of pipes and pressure vessels and monitor the thinning degree after corrosion during use.
The ultrasonic thickness gauge is widely used in petroleum, chemical industry, metallurgy, shipbuilding, aerospace and other fields.
The substitute of this model is KT320.
Ultrasonic Thickness Gauge Commodity Property
Display: 128×64 LCD with LED backlight
Standard Sensor: 5MHZ φ10
Type of Battery: 2 of AA battery
Battery Capacity: 3v
Continuous working period: 100 H (if back light off)
Communication: USB
Outline Dimensions: 150mm×74mm×32mm
Main unit Weight: 238 g
Ultrasonic Thickness Gauge Technical Data
Measuring range
0.75mm~300.0mm (0.03inch~15.7 inch）
(Depends on materials and conditions)
Sound Velocity Range
1000m/s~9999m/s (0.039~0.394in/µs
Display resolution
0.01mm (for lower than 99.99)
0.1mm (for more than 99.99mm)
Accuracy
±0.05mm (for lower than 10mm)
± (0.5%Thickness +0.05) mm (for more than 10mm)
± (1%Thickness +0. 1(for more than 100mm)
Units
Metric/Imperial unit selectable.
Memory
5 files (up to 100 values for each file) of stored values
Standard Package
KT330 Host 1 PC
Standard Probe No5 1 PC
Built-in 4mm Calibration Piece 1 PC
Couplant 1 PC (Non-aviation transport)
USB Cable 1 PC
User Manual 1 PC
Instrument Case 1 PC
Related Products
Probes Specifications of Ultrasonic Thickness Gauge
| Probe Specifications | |
| 5MHZ φ10/90° | Frequency 5MHZ, crystal size φ10, measuring range 1.2mm-200mm(steel) Min. Area for Pipe φ20x3mm. For temperature -10～60℃. Application: general |
| 5MHZ φ10 straight | Same as 5MHZ φ10/90°, only the probe is straight to the cable. |
| 7MHZ φ6 | Frequency 7MHZ, crystal size φ6, measuring range 0.75mm-80mm(steel) Min. Area for Pipe φ15x2mm. For temperature -10～60℃. Application: thin work piece |
| 5MHZ φ14 | Frequency 5MHZ, crystal size φ14, measuring range 3mm-200mm(steel) Min. Area for Pipe φ30mm. For temperature -10～60℃. Application: high temperature below 300℃ |
| 2MHZ φ12 | Frequency 2MHZ, crystal size φ12, measuring range 3mm-40mm (casting steel) Min. Area for Pipe φ20mm. For temperature -10～60℃. Application: casting work piece |
| 2MHZ φ22 TSTU32 | Frequency 2MHZ, crystal size φ22, measuring range 5mm-60mm (casting steel) 0-400mm (forged steel) Min. Area for Pipe φ30mm. For temperature -10～60℃. Application: casting, forged work piece |
xxxxxx
Your cart is currently empty.