kairda-ndt
KR310 Surface Roughness Tester
KR310 Surface Roughness Tester is high precision split type color display surface roughness measuring instrument, the drive unit can be stored in the main unit measuring for flat surface, and other measurement, or separated from the main unit by using the long 10 pin cable which allows measurement in any orientation, it is more flexible, the driver can be separated and re-connected in one simple step. The standard 4-foot height adaptor is 40mm adjustable.
The KR310 Suitable for shop floor, laboratory, convenient for mobile measurement. Measuring roughness on metals or other hard surfaces
Features
* Mechatronics design, small size, light weight, easy to use.
* DSP chip for control and data processing, fast speed, low power consumption.
* Compatible with ISO, DIN, ANSI, JIS national standards.
* Continuous working time more than 20 hours.
* Large capacity data storage of 100 measurement (original data and waveform).
* Real-time clock setting and display, convenient for data recording and storage.
* With automatic sleep, automatic shutdown and other power saving functions.
* Reliable anti-motor dead circuit and software design.
* Display measurement information, menu prompt information, error information, switch on and off and other prompt information.
* Chinese/English language selection.
* Can connect computer and printer.
* Print all parameters or any parameters set by the user.
* Optional curved surface sensor, deep slot sensor, small hole sensor, micro printer, measuring platform, lengthening rod, extension rod and other accessories.
Technical Data
Measuring Range z-axis | 320μm (-160μm~160μm) / 12600μin (-6300μin~+6300μin) |
Measuring Range x-axis | 17.5mm/0.7inch |
Testing Parameters | Ra Rz Rq Rt Rp Rv R3z R3y Rz(JIS) Rs Rsk Rsm Rku Rc Ry Rmax Rmr Rpc Rk Rpk Rvk Mr1 Mr2 |
Sampling Length | 0.25, 0.80, 2.50mm |
Evaluation Length | 1~5 sampling length |
Filter | RC, PC-RC, Gauss, D-P |
Assessed Graphic | Rmr curve, Roughness curve, Primary Profile |
Indication Accurate to | 0.001μm |
Tolerance | ± (5nm+10% of RA value of standard specimen) |
Variability | <3% |
- Main Unit
- KS130 or KS160 Sensor
- 40mm Height adapter
- Calibration block & Bracket
- Standard & 1m cable for drive unit
- Touch pen
- Power Charger & USB Cable
- User manual
- Instrument case
xxxxxx
Your cart is currently empty.